Eagle Lights TrailSignal UTV Street Legal Turn Signal & Horn Kit — Plug-and-Play, Universal Fit (4 Amber LEDs)
Description
Description
Make your side-by-side seen and heard. The Eagle Lights® TrailSignal™ kit adds bright amber turn signals, hazards, and a clear 110 dB horn in one easy, pre-wired package. Built for harsh trails and fast installs, it’s the cleanest path toward meeting your local street-legal equipment requirements* while keeping your machine looking factory.
Key Features
-
Universal, Plug-and-Play: Pre-assembled, labeled harness with extended leads for 2/4/6-seat vehicles—no wire guessing or splicing required.
-
High-Visibility Amber LEDs: Optimized optics cut through rain, fog, and dust for clear signaling front and rear.
-
Durable, Weather-Sealed Build: Impact-resistant housings and connectors; designed to shrug off vibration, mud, and washdowns.
-
Pro-Grade Relay Module: Stabilizes current and protects the circuit for consistent flashes and long service life.
-
Clean Install: Color-coded connectors and included zip ties make routing tidy and professional.
What’s Included
-
(4) Amber LED turn signal lights
-
(1) Left/Right turn rocker switch
-
(1) Hazard + horn rocker switch
-
(1) Pre-wired harness set with relay
-
Nylon cable ties set
-
Installation guide
Compatibility (Universal 12V)
Designed for most UTVs/ATVs/Golf Carts including (not limited to): Polaris RZR/Ranger/General, Can-Am Maverick/Defender/Commander, Kawasaki Teryx/Mule, Yamaha Wolverine/Talon/Pioneer, CFMOTO ZForce/UForce, Arctic Cat/Wildcat, Segway, golf carts (use 12V power).
Power note: Works on 12V DC systems. Golf carts may require a step-down converter if not already 12V.
Why Riders Choose Eagle Lights®
-
Pre-wired simplicity saves hours of install time
-
Bright, uniform amber output for maximum on-road awareness
-
Built to handle real trail abuse—dust, water, shocks, and washdowns
-
Backed by Eagle Lights® support and our lifetime warranty on LED components
Installation Tips
-
Mount lights where they’re clearly visible front and rear.
-
Tie into an ignition-switched 12V source if you prefer the switch indicator not to remain lit with the key off.
-
Route and secure excess harness length along the frame for a factory finish.
* Street-Legal Disclaimer: Requirements vary by state/province/municipality. This kit helps meet common on-road equipment rules; verify your local laws for mirrors, plates, mirrors with signals, etc.
Care and Maintenance
Care and Maintenance
For routine care and long-term protection, we recommend RideRevive on all parts of your bike. It’s safe for all surfaces and perfect for regular maintenance. For the best results, pair it with our MotoFiber towels, engineered for safe, swirl-free cleaning.
We offer a full detailing kit for your ride here.
Installation Instructions
Installation Instructions
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Can this light be used with other aftermarket lighting?
Can this light be used with other aftermarket lighting?
In most cases, yes. Our lights are compatible with other quality aftermarket accessories.
Is this compatible with my factory wiring and switches?
Is this compatible with my factory wiring and switches?
Yes. Our lighting products are designed to work with factory wiring and controls on most motorcycles, allowing them to function just like the original lights once installed.
Does this light cause flickering, error codes, or warning lights?
Does this light cause flickering, error codes, or warning lights?
Our lighting is designed to operate smoothly without flickering or triggering warning messages on most motorcycles. In rare cases, certain models may require an additional module or adapter for optimal performance. Any additional accessories are clearly labeled at the top of the page.
Will this affect my bike’s battery or electrical system?
Will this affect my bike’s battery or electrical system?
No. LED lighting is more efficient than traditional halogen bulbs and draws less power, making it safe for your bike’s electrical system when installed correctly.
Will this light work in rain, heat, and cold weather?
Will this light work in rain, heat, and cold weather?
Yes. Our motorcycle lighting is built for real-world riding and designed to perform reliably in rain, heat, cold, and varying weather conditions. All components are sealed and tested for outdoor use.
Will this fit my motorcycle?
Will this fit my motorcycle?
Easy! Just use the fitment checker on the top of the page. Click on "Select Ride", enter you bike and it will confirm if it fits or not!
Is installation plug-and-play or will I need to modify anything?
Is installation plug-and-play or will I need to modify anything?
If you need any additional accessories, it will be listed on the page. If any accessories may be required, an installation accessories guide will be above.
What if I order the wrong product?
What if I order the wrong product?
Not a big deal. Just contact us to return it!
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
Is this product street legal and safe to use?
Is this product street legal and safe to use?
All of our products are designed to conform to US DOT and SAE standard. Check with local law enforcement as codes can vary by city or state.
What warranty or guarantee does this come with?
What warranty or guarantee does this come with?
Our products come with a lifetime warranty! If you have a problem with the product, just contact us. We can either troubleshoot the issue or get a new one sent out to you.
