Eagle Lights 2” Infinity Beam Front and Rear (1157) LED Turn Signal Kit w/ Running LED Light Ring Covers for Harley Davidson Motorcycles

The Eagle Lights 2" Infinity Beam Front and Rear Harley LED Turn Signals are bright, powerful LED turn signals with halo running lights. These turn signals are more noticeable to other drivers, react quicker to your inputs and are more reliable than the stock OEM bulbs. Our front LED turn signals allow the LED halo ring to turn off when the amber turn signal is activated for maximum visibility and safety. The rear turn signals function as brake lights with halo running lights. 

• EAGLE LIGHTS HARLEY LED TURN SIGNALS - Upgrade your old turn signals to LED! Easy to install and awesome looking! As easy as changing a bulb. The outer ring of 7 LEDs illuminate for the running light. They are highly visible and a great upgrade for your bike being over 3X brighter than stock.

• EASY INSTALLATION – With the Eagle Lights LED Turn Signals, upgrading couldn’t be easier. Our LED turn signals are plug and play on most Harley Davidson models. Installation typically takes about 5 minutes. Pop off the lens, replace it with your new LED turn signal, push the turn signal into place and go for a ride. Ride safer, look better, and ride longer with the Eagle Lights LED Turn Signals.

• NEVER GO DARK™ – Brand new design. Our LED turn signals have a 7 LED halo ring mounted inside an integrated trim ring. The front halo ring is 6000K and is a pure bright white light. The inner 24 LEDs are amber and function as the turn signal. The halo ring will turn off when the LED turn signal is active. For the rear turn signals the halo ring is red and is a bright running light. The inner 24 LEDs are also red and function as the turn signal and brake light. They will match all of your other LED products.

• EAGLE LIGHTS LIFETIME WARRANTY - Our Harley LED turn signals are designed to outlast your bike! But should something go wrong, you are covered by a lifetime manufacturer's warranty. The best warranty in the business! No hassle returns and no hassle warranty replacement.

• FITMENT: Fits models WITHOUT a rear center tail light. Your stock turn signals should function as brake, turn signal and running light. If they do, you will need these turn signals. They are a double contact 1157 base. They are not compatible with motorcycles that have 1156 - single contact bases. If you do have a center tail light, you will need the 1156 single contact version.

International Harley Models: Front turn signals will not fit International Harley Models. Please check your original bulbs prior to purchase. 

Do I need a Load Resistor?

If your motorcycle is listed below, the turn signals will blink slightly faster than normal with LED turn signals installed. We offer two options to correct the faster turn signal speed.

Load Resistors can be used to bring the flash rate down to the stock speed. They are spliced into the wiring harness underneath the seat.

Plug-In Load Resistors does the same function as the standard load resistors but plugs in directly to the rear lighting harness underneath the seat. Only one unit is needed for all 4 turn signals. It can be used on the following models: